No package, one set of plant can be held in two 40HC
20 days after receiving the deposit
Base of the furnace shell insulation
& dust removal system
Row-tube condensing system
Oil – water separator
Desulfurization and Dust removal
Oil – gas exclusion
Heavy oil storage tanker
Residue oil tanker
Steel, channel steel, gas gun, falanges,blind plates
Pipe valves, screws, compensator,
1. Directly put the waste tires into pyrolysis reactor by auto feeder or by Munual, then we burned the fuel to hear the reactor ,the fuel can be below according to different market ,even which can be use two kind of the fuel material to get the economic way.
2. Fuel oil (including the production made )
4.Nutural gas(including the waste gas produced from process)
5.The carbon black produced from process
The temperature of reactor will be keep increasing up to 220°c-250°c, the oil gas which produced during the temperature increasing go to gas seperator ,the lights gas parts will be cool down to the liquid oil ,and collected into the final oil tank .meanwhile , the heavy parts goes to heavy oil tank .but in lights gas parts ,there have a few hard parts which can not be cool down liquid oil ,they will be processed by water seal to remove the dangerous parts ,then back to combustion system to heat the reactor instead of raw fuel material .that's mean we can stop to the fuel material when it have the gas produced .this way can save fuel material in great margin .
2.Auto discharge system :
after finish the process ,run the auto impuse collection machine ,the carbon black poder will be collected in the tank of impuse machine without any flies as those process was done by full closed way .the most important is our auto impuse collection machine not only to transfer the carbon black from reactor automatically ,but also can filter the better carbon black with fine mesh from steel and bigger power .then we can use the fine poder for below industry to get more profits :
1.Electric cable jacketing
3.Hose and Doormat
4.Black Nylon Bag
6.Automative spare parts
8.Black Colorant in rubber materials
10.Industrial rubber products
3.the bigger carbon power can be further process to be pellets by pellet machine below :
Treatment of the residues
There are normally 3 kind of residues-exhausted gas, water liquid, waste solid,
1.exhaust gas - By the means of full combustion in water seal and gas burner, the pollution of exhaust gas shall be eliminated and a large amount of fuel shall be saved. Also dust collector will be used to discharge the smoke and dust, and the discharge of the smoke and dust meets the related standards in 2001.
2. waste liquid - Faintly acid waste water will be produced in the process of treatment of oil products, after neutralization by adding faintly alkaline liquor, the neutral waste water shall be harmless to three- grade filtration and can be discharged into special evaporation processor to vapor.
3. Waste solid -
the solid left is carbon black, no solid waste left.